Ethernet Silent Bitcoin Bitmain Antminer T19 S19 S19 Pro 110Th/S

Antminer S19 /S19 PRO FOR HIGH INCOME EARNING Mining Machine

Description

Model Antminer S19 Pro (110Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 110Th/s for a power consumption of 3250W.

The hash rate of the device is 110 TH / S. No other manufacturer can offer a device with the hash rate that high. The power consumption of the Bitmain Antminer S19 pro 110th is 3250 W / h. It means that the manufacturer managed to lower the power consumption while reaching the efficiency point of 29.5J / TH. These numbers were achieved thanks to the implementation of new-generation microchips developed by Bitmain. Before the device release, there was information that the chip would be manufactured by Samsung. However, this information has not been confirmed and now proved to be wrong.

Specifications

We compared and tested the performance indicators of two latest and most energy-efficient bitcoin mining products (bitmicro's whatsminer m30s + and bitcontinental's ant miner S19 Pro). Obviously, the more expensive 7Nm bit products in mainland China are more powerful, but the output of miner is very similar. Our data in just three days show that the performance of bitcontinental miner is slightly higher than that of whatsminer, but whatsminer seems to have better stability. Overall, both machines are impressive, and we predict that the two companies will compete equally in the next few years.

NOTE:

1. To prevent the spread of virus in the firmware, which can cause damage to the Antminer S19 series, the setting function of “Secure Boot” has been switched on and the “Root Authority” function has been disabled.

2. If the user fails to use the product in accordance with the given instructions, specifications, and conditions provided, or change the function setting without Bitmain's prior consent, Bitmain will not be liable for any damage arising therefrom. (1-1) Caution: Wrong input voltage may probably cause miner damaged (1-2)Max condition: temperature 40°C, altitude 0m (1-3) Two AC input wires, 10A per wire

Antminer S19 PRO 110th

Bitmain has brought to market a new advanced ASIC miner Antminer S19 PRO 110th. It is a high-tech device that is considered one of the most powerful ASICs of the new generation. The manufacturer claims that it provides profitable currency mining even after halving. This point proves Bitmains leadership at the mining market, and also confirms the relevance of ASICs in 2020. We advise you to purchase this device from if you want to be amongst leaders of the mining market. Antminer S19 PRO in comparison with Antminer's previous models gives a much higher hash rate and much more efficient.

Calculation power
It is reported that the computing power of bitcontinent S19 Pro is 110 Th / s, while that of whatsminer m30s + is 100 th / s. For a single machine, this is an incredible amount of hashing attempts, with more than 100 trillion attempts per second to find a bitcoin block hash. As shown in Figure 1 below, the calculation forces of the two mining machines reached their respective target levels during this period.
After upgrading whatsminer m30s + to the latest firmware, its computing power is 103.8 Th / s, which is 3.8% higher than the propaganda level. However, bitmainland's S19 Pro reaches 110.7 Th / s, which is 0.6% higher than the propaganda level. It can also be seen from the figure that whatsminer has more stable computing power, and the deviation during the period is obviously smaller than that of bitcontinental products. We think that this stability is an important factor in favor of bit micro.
Different test environments also lead to different computing power. In this case, the temperature is quite high, which may have affected the results.

Packaging Details: Original carton packing and waven bag.
Different ways of shipping according to customers' needs.
Lead time: 1~3 days for small order, for large quantiy and mass order, please contact.